[Oct 07, 2022] New 2V0-41.20 Exam Dumps with High Passing Rate
Get 2V0-41.20 Braindumps & 2V0-41.20 Real Exam Questions
Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam
Installing, configuring, handling, and troubleshooting NSX-T Data Center 3.0 solutions should be 6 months or more of experience for the minimally eligible applicant. Candidates who are well aware of NSX-T characteristics, functions, and architectures should take this exam. People with at least 6 months of Linux and KVM hands-on experience are highly encouraged to apply for this certification as this will give them an edge. In IT and with VMware vSphere and its command line, they should have 1 year of experience operating. Additional industry-recognized IT certifications or accreditation would likely be held by the successful applicant. All the information found in the exam sections mentioned below should be in the MQC.
Professional VMware NSX-T Data Center 2V0-41.20 Exam Certified Professional salary
The estimated average salary of Professional VMware NSX-T Data Center 2V0-41.20 certified professional is listed below:
- Europe: 80,000 EURO
- England: 72,000 POUND
- United States: 95,000 USD
- India: 7,028,000 INR
NEW QUESTION 22
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager logging-level debug
- B. set service nsx-manager log-level debug
- C. set service nsx-manager logging-level debug
- D. set service manager log-level debug
Answer: A
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 23
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in hours.
- B. An alarm can be suppressed for a specific duration in minutes.
- C. An alarm can be suppressed for a specific duration in days.
- D. An alarm can be suppressed for a specific duration in seconds.
Answer: A
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-92D61850C1E6.html
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved." https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE74-EF43CFC75F19.html
NEW QUESTION 24
Which is correct when deploying a NSX Edge in a KVM only environment?
- A. deploy NSX Edge on a bare-metal server
- B. deploy NSX Edge VM with ISO image
- C. deploy NSX Edge VM with QCOW2 image
- D. deploy NSX Edge VM with OVF template
Answer: A
NEW QUESTION 25
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. must have only active-active edge nodes
- C. can have a maximum of 8 edge nodes
- D. can have a maximum of 10 edge nodes
- E. must contain only one type of edge nodes (VM or bare metal)
Answer: A,D
Explanation:
Explanation
NEW QUESTION 26
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. nsxcli ssh session on
- B. set esxcli ssh session off
- C. set cli-timeout 0
- D. set cli ssh timeout 0
Answer: C
NEW QUESTION 27
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. debug
- B. ifconfig
- C. ipconfig
- D. tcpdump
Answer: B
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-
NEW QUESTION 28
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- B. vrf 3
- C. vrf 1
- D. vrf 4
- E. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- F. sa-nsxedge-01(tier1_sr)> get bgp neighbor
Answer: A,B
NEW QUESTION 29
Which network tool cloud an administrator use on an ESXi 7 host to capture packets when troubleshooting connectivity issues?
- A. pktcap-uw
- B. tcpdump
- C. Wireshark
- D. net-stats
Answer: A
Explanation:
If you do when troubleshooting connectivity issues on your Virtualization environment. This post will help you to capture Network traffic on ESXi host using pktcap-uw tool.
NEW QUESTION 30
Which three can an administrator define in a transport node profile? (Choose three.)
- A. Segment Profile
- B. Segment
- C. Uplink Profile
- D. VDS switch configuration
- E. N-VDS switch configuration
- F. Logical Router
Answer: C,D,E
NEW QUESTION 31
What are three NSX Manager roles? (Choose three.)
- A. policy
- B. manager
- C. master
- D. zookeeper
- E. controller
- F. cloud
Answer: A,B,E
NEW QUESTION 32
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. Segment Port
- B. DFW
- C. Tier-1 Gateway
- D. Group
- E. Segment
Answer: B,D
NEW QUESTION 33
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?
- A. Place a partner SVM on each compute cluster node.
- B. Centralize partner SVMs in a service cluster.
- C. Add partner SVMs to an edge cluster.
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster." - D. Create a secondary vNIC on each quest VM for SVM communication.
Answer: A
NEW QUESTION 34
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Insertion
- B. Service Introspection
- C. Service Consumption
- D. Service Deployment
- E. Service Registration
Answer: A,B,D
NEW QUESTION 35
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. must have only active-active edge nodes
- C. can have a maximum of 8 edge nodes
- D. can have a maximum of 10 edge nodes
- E. must contain only one type of edge nodes (VM or bare metal)
Answer: A,D
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-
NEW QUESTION 36
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager logging-level debug
- B. set service manager log-level debug
- C. set service nsx-manager log-level debug
- D. set service nsx-manager logging-level debug
Answer: B
NEW QUESTION 37
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- B. Automatically created when Tier-1 is created.
- C. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
- D. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
Answer: A
NEW QUESTION 38
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation
NEW QUESTION 39
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. increased north/south bandwidth
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions:
* ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways. - B. Failover of services
- C. traffic predictability
- D. traffic load balancing
- E. stateful services leveraged
Answer: A,D
NEW QUESTION 40
Which two statements are true for a Tier-1 Gateway? (Choose two.)
- A. owned and configured by the Tenant
- B. always configured in active-standby mode
- C. connects to physical networks
- D. supports ECMP
- E. owned and configured by Service Provider
Answer: B,C
NEW QUESTION 41
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- B. esxcli network diag ping -I vmk0 -H <destination IP address>
- C. esxcli network diag ping -H <destination IP address>
- D. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
Answer: A
Explanation:
Explanation
https://kb.vmware.com/s/article/1003728
NEW QUESTION 42
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. Multicast routing is implemented with PIM Sparse-Mode.
- C. Tier-0 gateways can be the Rendezvous Point.
- D. An Edge can be the Rendezvous Point.
- E. IGMP Snooping is used to populate multicast forwarding tables.
Answer: B,E
NEW QUESTION 43
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. et time-server
- B. set timezone
- C. get timezone
- D. set ntp-server
Answer: D
NEW QUESTION 44
Which three protocols could an NSX administrator use to transfer log messages to a remote log server?
(Choose three.)
- A. HTTPS
- B. SSL
- C. TCP
- D. TLS
- E. SSH
- F. UDP
Answer: C,D,F
Explanation:
Explanation
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-p
NEW QUESTION 45
......
2V0-41.20 Dumps To Pass VMware Exam in 24 Hours - Exam4Tests: https://exam-labs.exam4tests.com/2V0-41.20-pdf-braindumps.html